How many bricks are on a pallet? A standard pallet of U.S. modular bricks holds about 500, but the real count shifts with brick size, weight, and supplier. This guide shows typical counts by brick type, so you can order the right number of pallets.
How Many Bricks Are in a Pallet?
A standard pallet of modular bricks holds about 500 bricks. That is the common U.S. benchmark, but it is not a universal rule.
Larger and heavier bricks fit fewer to a pallet. Across the common formats in the manufacturer data below, counts run from roughly 180 to 500. Always confirm the exact number with your supplier before you place an order.
Pallet, Cube, or Bundle: What Is the Difference?
A cube is a banded block of bricks, and it usually ships on a wooden pallet. Suppliers often use “pallet” and “cube” to mean the same thing.
A bundle is a smaller strapped group of bricks. Your quote or invoice might list any of the three terms. Check the unit count, not just the label.
Standard Pallet Counts by Brick Type
This table shows how many bricks come on a pallet for each common U.S. format. The counts and brick weights come from Interstate Brick’s published face brick specification sheet, and the pallet weights are my own math.
| Brick Type | Actual Size (inches) | Bricks per Pallet | Weight per Brick | Approx. Brick Weight per Pallet |
|---|---|---|---|---|
| Modular | 3-5/8 x 2-1/4 x 7-5/8 | 500 | 3.6 lb | 1,800 lb |
| 2-3/4 inch modular | 3-5/8 x 2-3/4 x 7-5/8 | 380 | 3.0 lb | 1,140 lb |
| King size | 3 x 2-5/8 x 9-5/8 | 424 | 4.5 lb | 1,908 lb |
| 4 inch modular | 3-5/8 x 3-5/8 x 7-5/8 | 305 | 5.2 lb | 1,586 lb |
| Norman | 3-5/8 x 2-1/4 x 11-5/8 | 300 | 5.2 lb | 1,560 lb |
| Utility | 3-5/8 x 3-5/8 x 11-5/8 | 183 | 8.0 lb | 1,464 lb |
| Roman | 3-5/8 x 1-5/8 x 11-5/8 | 408 | 4.0 lb | 1,632 lb |
| Modular paver | 3-5/8 x 2-1/4 x 7-5/8 | 500 | 4.2 lb | 2,100 lb |
Treat these as typical values. Other manufacturers pack their cubes differently.
Why Does the Brick Count Change From Pallet to Pallet?
Brick size, weight, and packaging method all change how many bricks fit on one pallet. A big utility brick simply takes up more room than a modular one.
Look at the table again. Utility bricks weigh 8 pounds each, so a cube holds only 183. Modular bricks weigh 3.6 pounds, so 500 fit.
Notice something else. The brick weight per pallet stays between roughly 1,100 and 2,100 pounds in every row. Weight limits shape the count as much as size does.
Solid and hollow bricks also differ in density. Pavers add another twist, since their packaging can differ from wall brick.
How Much Does a Pallet of Bricks Weigh?
A pallet of 500 modular bricks weighs about 1,800 pounds before you add the pallet itself. Use this formula for any type:
Pallet weight = (bricks per pallet x weight per brick) + pallet weight
Most pallets of bricks weigh well over a ton. A king size cube reaches nearly 1,900 pounds, and a modular paver cube hits about 2,100.
That weight matters on delivery day. Ask your supplier whether the truck carries a forklift. Check that your driveway and ground can handle a loaded flatbed.
How Many Square Feet Does a Pallet of Bricks Cover?
A 500-brick modular pallet covers roughly 73 square feet of wall. Interstate Brick lists about 6.86 modular bricks per square foot, and 500 divided by 6.86 gives 73.
You may see 6.75 bricks per square foot elsewhere. That figure assumes a 3/8 inch joint and yields about 74 square feet. The small gap comes from different joint assumptions.
Taller or longer bricks cover more wall per unit, but you get fewer of them per pallet. The coverage per pallet can look similar across types, so always run the numbers for your exact brick.
How Many Bricks Come in a Pallet in the UK?
A UK pallet of facing bricks usually holds about 400 to 500 bricks. Dense engineering bricks run closer to 280 to 320, because weight caps the load.
UK bricks also use metric sizes, so a US count will not match. Stay in one system when you compare quotes.
Ready to Start Your Estimate?
Skip the hand math. QuickTonnage calculates asphalt tons, cubic yards, and cost in seconds.
Use Our Brick CalculatorHow Many Pallets of Bricks Do You Need?
Divide the total bricks you need by the bricks per pallet, then round up. Here is the full process:
- Measure the wall area and subtract doors and windows.
- Multiply the remaining area by the bricks per square foot for your type.
- Add 5 to 10 percent for cuts, chips, and breakage.
- Divide by the bricks per pallet.
- Round up to the next full pallet.
Here is an example. A wall needs 1,150 modular bricks, waste included. At 500 per pallet, that is 2.3 pallets, so you order 3. You then have 1,500 bricks and a healthy buffer.
You can skip the manual steps with our brick calculator. It handles wall area, joints, and waste in one pass. For other materials on the same job, our free construction calculators cover the rest.
Tips for Ordering Bricks by the Pallet
Ask for the exact cube count in writing before you pay. A short call prevents most surprises.
Order everything at once when you can. Bricks from different production lots can vary in color, and a mismatched row stands out on a finished wall.
Ask whether the supplier takes back unopened cubes. Some do, and some do not. That answer decides how big a buffer you can afford.
Mixing brick with block? Pallet counts for concrete units differ a lot. Our concrete masonry guides explain block sizes and quantities, so you can plan both materials side by side.
Common Mistakes When Ordering Pallets of Bricks
A few habits cause most ordering errors. Avoid these and your delivery will match your plan:
- Assuming every pallet holds 500. Only modular and modular paver units reach that count in the table above.
- Forgetting waste. Cuts around windows and corners always eat extra bricks.
- Ignoring weight. A 2,000 pound cube needs the right equipment and a firm place to land.
- Mixing up pallets and cubes. Read the unit count on the quote.
- Mixing metric and imperial bricks. They do not line up in a wall.
Final Thoughts
About 500 bricks fit on a standard modular pallet, but counts run from roughly 180 to 500 across common types. Check the exact cube count, add a waste buffer, and always round up to full pallets.
Plan the delivery as carefully as the wall. A heavy cube in the wrong spot costs more than a few extra bricks.